Bio X

Other Details

• Microprocessor control
• Standard infusion tube for medical fluids or blood
• Big LED screen showing operating
• information and fault situation of each channel
• Holder for warming profile
• Visual check of the infusion flow from the opening
• Electric warming profile controlled by sensors
• Cable to warming profile
• Optimal heating up to the patient

High performance dry heater for warming of: 

• Infusion fluids
• Blood transfusion and blood products
• Blood return feeds / dialysis fluids Enteral/parenteral nutrition and rinsing solutions

Features:

Technology of control:

• Microprocessor integrated with temperature sensors provides high precise control

Safety system:

• Permanent running self-tests, 24 hours continuous operating
• Double independent over-heating protections and automatic cut off
• Visual and acoustic alarm for high temperature / low temperature/sensor fault 

Dual channels: 

• Each channel can work independently with own temp. setting and temp control 
• Two channels can be combined to enlarge the warming capacity 

Heating up to the patient:

• IV tube is completely wrapped in, no heat loss

User friendly interface:

• Big LED screen showing set temp., actual temp., heating time and fault situation
• Easy and quick to set up, ready to use within minutes.

Open system:

• Accepts standard IV tube, no special disposables needed 

Bio-X is the authorized channel partner for Blood Warmer from Keewell Medical Technology. The Blood and Infusion Warmer can be used in all cases in which hypothermia of the patient through cold transfusions and infusion solutions is to be prevented. The intelligent control circuit of the device operates and deals with the temperature signal that is sent by high-precision sensor, and continually adjusts heating state, in order to rapidly keep the surface temperature of the heat exchanger at the set temperature. At the same time, the heat is transferred into the flowing liquid in the tubing that is placed in the grooves of the heat exchanger, to increase the temperature of the liquid. There are dual independent temperature protections inside the device to ensure the security of use.

Features:

Technology of control: 

• Microprocessor system integrated with sensors provides high precise control, permanent running self-tests and malfunction alarms 

Low cost disposables: 

• Grooved dry heating cylinder enables to use standard extension tube or routine IV tube at slow fluid rate 

Accurate temperature monitoring: 

• Three sets of independent temperature sensor and numerical display for real-time temperature or set temperature in OTC 

Multiple protections for high safety: 

• High temperature cut-off, low temperature alarm and sensor fault alarm 

Unique high temperature alarm testing function: 

• Extra safe in use and easy for maintenance 

Warming capacity: 

• Up to 6000m1/hour (flow rate kvo —100m1/min) 

Good for simultaneous warming multiple infusions 

Quick warming up & 24 hours continuous operating 

Bio-X is the authorised channel partners for Blood Warmer from Kewell Medical Technology. The Blood and Infusion Warmer can be used in all cases in which hypothermia of the patient through cold transfusions and infusion solutions is to be prevented. The intelligent control circuit of the device operates and deals with the temperature signal that is sent by high- precision sensor, and continually adjusts heating state, in order to rapidly keep the surface temperature of the heat exchanger at the set temperature. At the same time, the heat is transferred into the ¿¿¿owing liquid in the tubing that is placed in the grooves of the heat exchanger, to increase the temperature of the liquid. There are dual independent temperature protections inside the device to ensure the security of use.

FT 1800 & FT 800 comes with an external warming pro¿¿¿le for better accuracy.

 

Bio-X is the authorised channel partners for Blood Warmer from Kewell Medical Technology. The Blood and Infusion Warmer can be used in all cases in which hypothermia of the patient through cold transfusions and infusion solutions is to be prevented. The intelligent control circuit of the device operates and deals with the temperature signal that is sent by high- precision sensor, and continually adjusts heating state, in order to rapidly keep the surface temperature of the heat exchanger at the set temperature. At the same time, the heat is transferred into the ¿¿¿owing liquid in the tubing that is placed in the grooves of the heat exchanger, to increase the temperature of the liquid. There are dual independent temperature protections inside the device to ensure the security of use.

FT 1800 & FT 800 comes with an external warming pro¿¿¿le for better accuracy.