Bio X

·         Aqua-wet gel.

·         Strong adhesive.

·         Polyethylene foam backing.

·         Hypoallergenic.

• Easy connection of blades and handle. 

• Works with xenon lamp.

• Includes one MRI compatible laryngoscope battery.

• MRI compatibility certificate up to 3 Tesla.

• Application rate ranges from 0.15 to 0.3% depending on the melt charge
• Plunge the recommended quantity as per the application guide to the bottom of the melt using a preheated cylindrical or rectangular basket type plunger when the temperature is falling. The degassing should be continued until the bubbling ceases
• Coat the plunger with a refractory coating to prevent iron pick up. Dry the plunger completely before use
• Remove the wrapper before the DEGASER tablets are plunged, otherwise metal may pick up hydrogen from the decomposition products of the wrapper. Do not expose DEGASER tablets to atmosphere as far as possible as moisture pick up would result
• As a gentle rolling action creates more efficient degassing than a turbulent action, apply DEGASER tablets in two or more successive operations rather than in a single operation
• In case of Al-Si Hypoeutectic and eutectic alloys, degas before modification treatment. This helps in securing a constant degree of modification by destroying any existing modification and then remodifying to a known and desired extent
• In case of AI-Si hypereutic alloys, degas before and after grain refining treatment. This helps in knocking off sodium present in the melt before grain refinement and in getting better dispersion of the primary silicon particles after grain reinement

• Degaser 200 : White Color Tablets (Only Degassing)

• DEGASSER tablets are available in four sizes : 50 gm, 100 gm, 250 gm and 500 gm.
• DEGASSER tablets are wrapped in poly lined aluminium foil or plastic shrinkable pouches and supplied in cardboard boxes.

• Slim, durable and effective
• Energy efficient
• No UV emission
• Flim active switch
• 12 step digital dimmer
• Long life- led life 100000 hours

Specifications:

User Friendly Surgeon Control Panel with Medical Gas Alarm

Surgeon Control Panel– We are Surgeon Control Panel manufacturer in Mumbai. We manufacture and supply a wide range of Surgeon Control Panel.

We are manufacturing the membrane type, touch screen type and monochromatic graphic touch screen panels.

MEMBRANE TYPE:
BIO-X Surgeon Control Panel has been designed to cope with technology and equipment in operating environment. It is designed to be user friendly and ease of operating & maintaining
purpose. Control panel comprising of following. User can choose any of the services as per their requirements.

1. Daytime digital clock Elapsed
2. Time digital clock
3. Temperature And humidity Indicator
4. Peripheral light controller
5. Medical gas alarm (Hi/Low/Normal)
6. LCD Hands free telephone

TOUCH SCREEN:

A] With the touch sensitive monitor, which can be operated directly at the touch of a finger, operating and monitoring of OT parameters like temperature, humidity is now very simpler. The graphical interface is capale of displaying all kinds of complex topologies. The status and command information is presented in a manner that is well structured and clear The end result is an overall system that is both modular and
flexible, enabling it to be adapted or expanded, or to accommodate new technologies.

This micro controller based electronic control panel is mounted directly on the theatre wall.
——
B] We also import the 27' touch screen panel form Samsung and have customized the software so as to incorporate the following features :

The following features are incorporated in the control panels.

1. Operation timing - Elapsed time.
2. Anesthesia countdown - Countdown timer
3. Time - Real time clock
4. Date
5. Temperature and Humidity Control and Display
6. Hands Free Telephone
7. Medical Gas Alarm System
8. Lighting Control - Peripheral, Showless Dome, Plenum Light, View box with
brightness control

• All our control panels are CE Marked.
• We can customize each segment of the control panel as per the requirement of the customer.
• We can develop the control panel with the following features:

I. Elapsed Time & Clock
II. Temperature and Humidity Control and Display
III. Lighting Control / Dimming (Peripheral and Surgeon Light)
IV. Medical Gas Alarm Systems
V. Hands Free Telephone
VI. HEPA Filter Status Indicator
VII. Laminar flow status
VIII. Music
We are also manufacturing the led based peripheral ceiling light for modular operation theatres.

We are a reliable manufacturer and supplier of finest range of OT and ICU Mats including Multilayer Mat, Antimicrobial Mat, Hospital Multimat, etc. The range is used in hospitals' emergency rooms, ICU, wards or operation theaters. This is an antimicrobial mat for warding of microbes from germinating into the area. The mat is made of foam, thin plastic sheets, or in metallic frame. The dust or dirt collected from outside may carry microbes or bacteria that may spread infection among the patients. Hospital Multimat traps the dirt and prevents the microbes from spreading inside. The Multimat has been designed for total protection from pathogen carriers.

Features:

• Designed for trapping the microbes
• Easy to install and maintain
• Advanced multilayer mat at dirt cheap prices
• Adhesive mixed with a special type of antimicrobial & antifungal chemical agent

• Offers good casting finish free from sand burn-on to reduce fettling costs and improves productivity.
• Do not cause any coating inclusion problems.
• When offered in the liquid form use toxic carriers and hence are safe to use.
• Can be easily remixed and applied due to their excellent suspension characteristics.
• It ensures clean peal to provide excellent cast surface finish.
• Significant cost saving through reduced post fettling.

• Color : Grey / Black
• Appearance : Liquid
• Specific Gravity : 1.00 + 0.02 gms/cc
• Bond : Good uniform coverage
• Settling rate : 5cc Max. per Hour

• 30 / 50 LITERS POLYCARBOYS

We would like to introduce ourselves as the suppliers of Insural Shapes. We are currently exporting our view boxes to Europe, Egypt, Australia, Singapore, Sri Lanka and other South East Asian countries. We offer Foundry Chemicals such as Hexachloroethane, Degasser 200, Degasser N2 (Nitrogen Based), Nucleant 2 (Grain Refiner), Insural Shapes-Cones Foundry Chemical, Cover Flux and many more items from India.

Due to our ethical business dealings, we manufacture, export and supply a wide range of Insural Shapes Cones Foundry Chemical. These cones find their wide usage in metal casting and degassing. The offered cones are manufactured using supreme quality basic materials and innovative techniques at our hi-tech production set up under experts’ observation. Our customers can easily purchase Cones Foundry Chemical from us in various sizes.

Alumina ceramic foam filter is mainly applied to the aluminum and aluminum alloys fusant filter equipment of continuous casting, half-continuous casting, gravity casting, and low pressure casting. It is also applied to other non-ferrous metal precision casting, gas-solid and liquid-solid separation medium, high temperature gas filter, chemical filling, sound absorbing material and catalysis carrier etc.

Scot- Magnesium Ingots are Min. 99.9% pure Magnesium Metal which have been acid washed to remove any surface impurities and the weight range from 7.5 Kg to 200 Gms

The main advantages are as follows:
1. Faster Dissolution time. (Since Tablet size is only 200 gms, it takes very less time to get dissolved)
2. Uniform Alloy Formation. (Smaller tablets can be evenly distributed in the furnace)
3. Acid Washed Ingots removes all the dirt and impurities on the surface of the metal.
4. Guaranteed purity of 99.9%
5. Better recovery.
6. Melts are lower temperature.
7. Exact quantity can be added hence no wastage or additional dosage. This would result in high cost saving.

Scot-H-Cote 110 is a ready-for-use, water based, zircon coating. It is suitable for use on most sand binder backgrounds and for almost all metals cast, including critical jobs in Cast iron and steel. Compared to conventional dressings, Scot-H-Cote 110 has superior application characteristics and gives an improved casting surface finish. The material is off-white in color.

Uses : • Ready for use • Dries faster • Versatile in use • Evolves negligible gases during pouring • Develops crack-free refractory layer in a single application • Eliminates sand fusion and ensures a smooth casting finish • Reduces rejections due to cast blows • Saves on oven drying cost

INSTRUCTION FOR USE: 1. Brush directly from can without any dilution or machine mixing. Where necessary, spray after dilution 8 parts of Scot-H-Cote 110 with 1 part of water. 2. Torch or even bake the coated mould / cores after air drying for 15 to 20 minutes.

It is used for for Production of Aluminium master alloys and gives faster melting time and better recovery than melting pure silicon metal.

It is available in different varients like 10% of AlSi, 20% of AlSi,30%  of AlSi and 40% of AlSi

Nowadays Multi-layered mats are the best way to prevent contamination spreading into surgery rooms by the introduction of tracked-in, bacteria-laden dirt and debris.STERYLAB produces MULTIMAT, the most advanced cheap multi-layered mat available in the market to date, easy to place and use, always effective. MULTIMAT is used for surgery rooms, I.C.U. units, whenever asepsis required.

MULTIMAT is composed of 30 adhesive, plastic thin sheets, for a total thickness of mm 2.40.

MULTIMAT can be placed down on the floor even under the open side or on its specifically designed metallic frame (PAL) to allow its movement during floor washing.

Blue coloured, MULTIMAT has the adhesive mixed with a specil antimicrobial & antifungal chemical agent (Benzoisothiazolia-3-one).

Its antimicrobial action destroys pathogens carried by dirt and debris (up to 100 millions bacteria per gram). The blue colour shows the trapped dirt till the top sheet is used.

ALUMINIUM BORON ALB 3% ALB 4% ALB 5% ALB 6% ALB 8% ALB 10%

Boron Hardener Scot-Modalloy-Boron contains usually 3%-8% Boron which improves the metallurgical properties of the cast along with the enhancement in conductivity.

• Prepare the required alloy composition and follow the normal fluxing and cleaning procedure as recommended
• Degas the melt with tablet degasser or by mobile degassing unit and dross off by using small quantity of cover flux
• After the degassing operation, add Boron hardner at an application rate of 0.25 to 0.40 by weight at temperatures between 700-750 Deg C
• Rabble the melt to ensure homogeneity, wait for 5 to 10min, then use

• Improvement in mechanical and metallurgical properties
• Enhanced conductivity
• Easy to use with no pollution problems
• No impurity added into the melt

Scot- Coverall 11
Scot- Coverall 05
Scot Coverall 36a
Scot Coverall 65
Scot- Coverall 56
Scot- Injection Flux
Scot Granulated Flux
Scot Mag Ri
Scotmag Ni
Scot -gr 2516

Features:

• Covering fluxes prevent oxidation losses of aluminium during melting. Thus improving the yield of molten metal from the charge.
• Drossing-off fluxes absorb oxides and non-metallic inclusions. It reduces the incidence of inclusions in the castings and also reduces the loss of metal through the dross.
• Modifying fluxes improve the mechanical properties of aluminium – silicon alloys by refining eutectic microstructure.
• Recovering fluxes help extract maximum aluminium from hot dross.
• Reclaimed fluxes minimise the melting losses associated with the melting of chips, turnings and borings.
• Furnace cleaning fluxes retain the melting capacity and efficiency of furnace while improving the life of the refractory lining

• Application rate ranges from 0.15 to 0.3% depending on the melt charge
• Plunge the recommended quantity as per the application guide to the bottom of the melt using a preheated cylindrical or rectangular basket type plunger when the temperature is falling. The degassing should be continued until the bubbling ceases
• Coat the plunger with a refractory coating to prevent iron pick up. Dry the plunger completely before use
• Remove the wrapper before the DEGASER tablets are plunged, otherwise metal may pick up hydrogen from the decomposition products of the wrapper. Do not expose DEGASER tablets to atmosphere as far as possible as moisture pick up would result
• As a gentle rolling action creates more efficient degassing than a turbulent action, apply DEGASER tablets in two or more successive operations rather than in a single operation
• In case of Al-Si Hypoeutectic and eutectic alloys, degas before modification treatment. This helps in securing a constant degree of modification by destroying any existing modification and then remodifying to a known and desired extent
• In case of AI-Si hypereutic alloys, degas before and after grain refining treatment. This helps in knocking off sodium present in the melt before grain refinement and in getting better dispersion of the primary silicon particles after grain reinement

• Degaser 200 : White Color Tablets (Only Degassing)

• DEGASSER tablets are available in four sizes : 50 gm, 100 gm, 250 gm and 500 gm.
• DEGASSER tablets are wrapped in poly lined aluminium foil or plastic shrinkable pouches and supplied in cardboard boxes.

Formula : C2Cl4

Molecular Weight : 165.85

CAS number : 127-18-4

• Manufacture of Hexachloroethane
• Laundry / Dry cleaning agent
• Solvent
• Intermediates
• De Greasing Solvent

• Formula : C2Cl4
• Purity : Min. 99%
• Boiling Point : 121 DC
• Freezing Point : -22 DC
• Density : 1.623 g / cm3

MS Drums

 Specifically developed for MRI environments with non-magneti materials.

• Not affected by magnetic field.

• 5 kg CO2 capacity.

• OUTER DIMENSION: 570 X 500 X 600mm 
• WORKING AREA: 450 X 450 X 450 mm
• SS 304/316 1.2mm double skinned door with Matte Finishing with 4mm thick toughened glass
• Protected With Electro-Magnetic Locks
• LED Light/UV Light
• Electrical On/Off Switch with both side display 
• Polycarbonate/Glass Side Panel as per Requirement
• Electromagnetic type interlocking systems on both sides

About us: We wish to introduce ouselves as the supplier of Medical Grade Monitors. Surgical Grade Monitor with single chip camera, light weight and easy hand carry design.

Specifications:

Model: BIOXSD19
Size : 19"
Resoluion: 1280 x 1024
Brightness: 300 cd/m2
Aspect Ratio: 4:3
Contrast Ratio: 1000:1
Viewing Angle: 178°
Colors: 16.7 Million
Response Time: 12 ms
Input Ports: VGA, DVI, HDMI, DP/Video BNC, S-Video, USB, DP, DVI In & Out , VGA In & Out, CVBC In & Out 
Power Req.: 12V DC
Mount Type: Desk / Wall
Enclosure Type: Plastic
Application: Gastroscopy, Endoscopy, Urology
Warranty:2 Year

· Light weight

· High sensitivity, non-chilling contact diaphragm.

· Specifically developed for MRI environments.

· MRI Compatibility certificate up to 3 Tesla.

The new Sirio S2/T is available also in the non-magnetic version (code 09636/RMN) for application in Magnetic Resonance environments from 1,5 and from 3.0 Tesla.
It is the ideal choice for intra-hospital transportation to transfer the patients from resuscitation to magnetic resonance in continuous ventilation without disconnection, ensuring greater comfort and safety to the patient.

Provides excellent performances taking advantage of the technological benefits offered by Siare.
It is equipped with several ventilation modalities: CPAP - PSV+ Apnoea Back-up - AUT+AST - MANUAL – PEEP.

FiO2 adjustable at 50% or 100% O2, Built-in spirometry, preassure trigger.

Long lasting internal battery and a serie of optional accessories designed for an easy mobility of the device. 

The most commonly used furnace in the secondary aluminium industry is the rotary furnace where aluminium scrap is melted under a layer of salt which consists of a mixture of chlorides and cryolites. There are various possible combinations of this salt flux. However after several trials and customers feedbacks, Flux 475 has proved to be the best combination for Aluminium melting in Rotary furnace.

• Flux 475 enhances the heat transfer to the metal
• It prevents the oxidation of the metal
• The salt takes up contaminants, such as oxides, carbides and others contained in the scrap or produced by reactions during the melting process
• Homogenous mixture for the alloy is achieved
• Helps in cleaning, covering as well as drossing of molten aluminium

The amount of salt used for the melting process depends on the scrap characteristics and varies in a range of 5-8% of the aluminium scrap charge.

First, the salt is melted down in the rotary furnace. Next the scrap is charged into the salt bath. After the metal is molten it is tapped and the salt slag is cast into steel moulds where it cools down. The advantage of the rotary furnace is that even highly contaminated scrap can be handled.

• CHLORIDES : 90% - 95%
• CRYOLITES : 5% - 10%

Standard Packing :

 
25 KG HDPE lined bags to 1.25 M.Tons jumbo bags
must be stored in cool and dry place

· Compatible with all MRI scanners.

· 32 inch Full HD (1080 p) screen.

· Resolution: 1920 x 1080 pixels

· Compatible with PC or any video sources.

· Fiber optic data transfer between control room and MRI room.

· No need for installation and easy mobilization in MRI room.

· Specially produced for interventional radiological applications.

· Thanks to fiber optic data transfer, there is no risk of noise leakage in MRI room.

· Compatible with MRI sound systems.

· Suitable with fMRI application.

· MRI compatible certificate up to 3 Tesla.

Potassium titanium fluoride also known as potassium fluotitanate or potassium hexafluorotitanate is a white crystalline powder that is used as a component in fluxing & grain refining agents for Aluminium and Magnesium and in the manufacture of Titanium metal.

PTF Is a white crystal powder-specific gravity(sp.gr) 3.012.melting point:7800C, soluble in hot water, slightly soluble in cold water and inorganic acid. It turns gradually into TiO2 when heated to 5000C in the air.

• Manufacture of Foundry Fluxes
• As a grain refiner for aluminium and aluminium alloys
• Manufacturing of Titanium Metal

• Formula : K2TiF6
• Standard form : White powder
• Purity : 99.0% Min
• Calcium : 0.01 Max
• Silicon : 0.01 Max
• Iron : 0.01 Max
• Moisture : 0.05% Max
• Particle Size (Mesh) : 200 Mesh

• 25 Kg HDPE Lined Bags.
• 1 M.Ton Jumbo Bags.

·         Can be used with all MRI scanners.

·         Specifically designed sound control unit for MRI needs.

·         Integrated speakers in music control unit provide the                  same sound with patient in control room.

·         Sound levels in MRI room and control room can be                      adjusted separately.

·         Push-to-talk microphone is provided to communicate with            patient.

·         MUTE circuit pauses music when the microphone is active.

·         Systems is suitable with fMRI applications.

·         PC, DVD player, MP3 player, USB or any source can be                used.

·         MRI compatiblity (up to 3 Tesla) certificate.

We are a reliable manufacturer and supplier of finest range of OT and ICU Mats including Multilayer Mat, Antimicrobial Mat, Hospital Multimat, etc. The range is used in hospitals' emergency rooms, ICU, wards or operation theaters. This is an antimicrobial mat for warding of microbes from germinating into the area. The mat is made of foam, thin plastic sheets, or in metallic frame. The dust or dirt collected from outside may carry microbes or bacteria that may spread infection among the patients. Hospital Multimat traps the dirt and prevents the microbes from spreading inside. The Multimat has been designed for total protection from pathogen carriers.

Features:

• Designed for trapping the microbes
• Easy to install and maintain
• Advanced multilayer mat at dirt cheap prices
• Adhesive mixed with a special type of antimicrobial & antifungal chemical agent

 •Specifically developed for MRI environments with
    non-magnetic field.

  •Not affected by magnetic field

  •5 or 10 lt O2 capacity.

  •Refillable.

  •MRI compatibility certificate up to 3 Tesla.

• ESR tubes are used for calculating the erythrocyte sedimentation rate. It is coated with an anticoagulant sodium citrate
• ESR tubes should be inverted 8-10 times to assure complete mixing with blood

·         Portable by high quality non-magnetic materials.

·         Adjustable hook height between 120 to 210 cm.

·         4x plastic hooks.

·         Suitable to use with infusion pump.

·         5x locking aluminum casters.

·         MRI compatibility certificate up to 3 hours.

Nowadays Multi-layered mats are the best way to prevent contamination spreading into surgery rooms by the introduction of tracked-in, bacteria-laden dirt and debris.STERYLAB produces MULTIMAT, the most advanced cheap multi-layered mat available in the market to date, easy to place and use, always effective. MULTIMAT is used for surgery rooms, I.C.U. units, whenever asepsis required.

MULTIMAT is composed of 30 adhesive, plastic thin sheets, for a total thickness of mm 2.40.

MULTIMAT can be placed down on the floor even under the open side or on its specifically designed metallic frame (PAL) to allow its movement during floor washing.

Blue coloured, MULTIMAT has the adhesive mixed with a specil antimicrobial & antifungal chemical agent (Benzoisothiazolia-3-one).

Its antimicrobial action destroys pathogens carried by dirt and debris (up to 100 millions bacteria per gram). The blue colour shows the trapped dirt till the top sheet is used.

Nowadays Multi-layered mats are the best way to prevent contamination spreading into surgery rooms by the introduction of tracked-in, bacteria-laden dirt and debris.STERYLAB produces MULTIMAT, the most advanced cheap multi-layered mat available in the market to date, easy to place and use, always effective. MULTIMAT is used for surgery rooms, I.C.U. units, whenever asepsis required.

MULTIMAT is composed of 30 adhesive, plastic thin sheets, for a total thickness of mm 2.40.

MULTIMAT can be placed down on the floor even under the open side or on its specifically designed metallic frame (PAL) to allow its movement during floor washing.

Blue coloured, MULTIMAT has the adhesive mixed with a specil antimicrobial & antifungal chemical agent (Benzoisothiazolia-3-one).

Its antimicrobial action destroys pathogens carried by dirt and debris (up to 100 millions bacteria per gram). The blue colour shows the trapped dirt till the top sheet is used.

• 940MM X 640MM x 50MM
• 1000MM X 7000 X 60 MM

• 940MM X 640MM x 50MM
• 1000MM X 7000 X 60 MM

• 940MM X 640MM x 50MM
• 1000MM X 7000 X 60 MM

• Parameter 600 x 600 mm 300 X 600 mm Dimensions (mm) Frame (L x H x T) 600x600 300 X 600 Viewing Area (W x H) 540x540/ 240x540 Power Consumption 15W 15W
• Light Source LED LED
• Power Supply Input AC100-240V AC100-240V 50/60Hz 50/60Hz
• Surface Brightness (LUX) >13,000 >13,000
• Colour Temperature 6500K 6500K

·         MRI compatible up to 3 Tesla.

·         ECG recording which is based on the MR technology. 

·         Safe SPO2 measurement.

·         Analog and digital outputs. 

·         Mains and battery power supply.

·         Optical measurement of core and skin temperature option.

·         Control unit option to observe the data and control the                 system from technician room.

·         Capno option for state-of-the-art gas analysis during                  anaesthesia.

·         Integrated magnetic field detector.

·         Visual and audible alarms.

Nowadays Multi-layered mats are the best way to prevent contamination spreading into surgery rooms by the introduction of tracked-in, bacteria-laden dirt and debris.STERYLAB produces MULTIMAT, the most advanced cheap multi-layered mat available in the market to date, easy to place and use, always effective. MULTIMAT is used for surgery rooms, I.C.U. units, whenever asepsis required.

MULTIMAT is composed of 30 adhesive, plastic thin sheets, for a total thickness of mm 2.40.

MULTIMAT can be placed down on the floor even under the open side or on its specifically designed metallic frame (PAL) to allow its movement during floor washing.

Blue coloured, MULTIMAT has the adhesive mixed with a specil antimicrobial & antifungal chemical agent (Benzoisothiazolia-3-one).

Its antimicrobial action destroys pathogens carried by dirt and debris (up to 100 millions bacteria per gram). The blue colour shows the trapped dirt till the top sheet is used.

  Continuous magnetic disturbance Monitoring.

 Flexible installation. 

  Alarm indicator lights not blocked by an outward swinging door.

 Safe, passive detection.

  Adjustable sensitivity and audio alarm levels.

 Conforms to all applicable recommendations  and  standards. 

  18 detection zones.

 Remote alarm capability.

· The fMRI system provides mapping of neural activity in the           brain during cognitive processes.

· The systems contains 4 components: a LED monitor, a sound       system, a fiber optic response button and a synchronization         system, along with accompanying FMRI presentation software. 

· The 32 MRI-compatible LED monitor enables presentation of       visual stimuli to the subjects at high spatial resolution and           across a large visual field.

· The MRI-compatible sound systems uses an acoustic method to    transfer the audio stimuli from a PC or any other audio source     to the subject directly.

·  The fiber optic response button records the subjects               behavioral responses during cognitive tasks . The      synchronization system ensures that the paradigms presented to the subject via the FMRI software, and the data acquisition process in the MRI scanner is synchronized.

· The FMRI software includes the major sensory and cognitive       paradigms that are used commonly in neuroscience applications   microphone is active.

· FMRI softwares are being upgraded automatically via internet.      Accordingly, new versions of the software are provided to the      customers for free.

·  Custom paradigms can be developed for special requests.

Scot-S-Mol 256z is a premium zircon filled high refractory sprit based liquid paint for application on green sand, silicate sand, and chemical bonded moulds and cores. It gives excellent casting finish even on heavy steel casting.

Scot-S-Mol 256z consists of High Quality of Zircon refractory powder with excellent suspension and covering properties.

When Casting of High temperature alloys such as Steel, Cast Iron , nickel and Copper base alloys into Green sand , CO2 – set and Resin bonded sand moulds , it is necessary to coat the sand surfaces which come into contact with molten metal, With this product application it prevents erosion , metal / mould reaction and sand burn on.

• Improves the cast / ingot surface finish
• Prevents erosions
• Eliminates contaminations of undesired elements
• Avoids metal / mold reactions and sand burn on
• Easy & Economical application method

• Scot-S-Mol 256Z is ready to use Liquid coating. It is applied by spraying, swabbing or Brushing
• After application applied surface is to be light off immediately to avoid solvent evaporation and to give good hard Bond
• A second layer can be applied if required after lighting of first layer
• It is essential to ensure that this product is thoroughly mixed to homogenous consistency by stirring before Use
• This Product is highly inflammable. Please keep away solvent and paint away while lighting of the paint
• Please use safety and protective equipments at the time of applications

• Appearance : Off white paste
• Specific Gravity : 1.63 + 0.05
• Solid content : 63% + 2%

Standard Packing :
25-40 Kg / Bucket
Store in cool and dry conditions

Scot-Cu Adal Tablets are used to adjust and compound the content of Cu in Aluminium alloy and to replace Al-Cu alloy. 

Scot-Cu Adal Tablets are used to adjust and compound the content of Cu in Aluminium alloy and to replace Al-Cu alloy. Scot-Cu adal tablets are light grey in color.

1. When the temperature of melt reaches 730-7600C, skim the slag off.
2. Add demanded additive and wait for 10 minutes then stir completely. (If the melt is dirty, should refine again and deslag, and then add the additive to improve the recovery.)
3. Test Copper inclusions after 40 minutes. 

• Superia – Sirolimus Drug Eluting Stent
• Sapphire Rx Balloon (Semi complaint cardiovascular balloon)
• Sapphire NC Balloon (Non complaint cardiovascular balloon)
• Sapphire II Balloon (CTO Balloon- 1mm diameter)
• Scoreflex Balloon (Plaque modification Device/ Cutting balloon)
• Expirator (Thrombus aspiration Catheter)
• Curex ( Drug Eluting Balloon)

• Angiography Guide Wire
• Guiding Catheter
• Introducer Needle
• Y Shape Introducer Needle
• Manifold 2 ports / 3 ports
• PTCA Y Connector (Screw, Push Pull Push Click)
• PTCA Y Connector Kit. (Screw, Push Pull Push Click)
• High Pressure Tubing
• P M Line
• RA Band
• Inflation Devices

• High speed
• High efficiency
• Low electrical consumption
• Only 5 minutes start up time
• Low noise
• Low wear and tear
• Low breakdown rate

• Food
• Chemicals
• Textile
• Medicine, and many more

• Quality- 93 to 93.8%
• Size- 1kg, 2kg, 5kg, 10kg, 20kg

·         Designed and built for sale use in the strong magnetic fields present MRI suite.

·         Replaceable plastic top with integrated push handles.

·         MR-Conditional accessories available.

·         Tested by independent testing to 3 Tesla level.

·         Dimensions:[174 cm H x 81.3 cm W x 63.5 cm D]

·         Cart net weight: 137 pounds [62.3kg] 

Scot-Coil feeder is a highly specialized machine for feeding AlTi5B1 coils into molten aluminium. It is very handy and easy to use in any working environment. The speed of the motor can be adjusted depending on the feed rate required. Scot-Coil feeder can feed the coil accurately and can be used for long duration without any break. This machine is maintenance free .

• Easy to Use
• Accurate coil addition
• Once regulator is set, no need to adjust every time
• Can work for long durations without down time
• Maintenance free

Put the coil into machine head.

Adjust the speed, when after start-up the machine, you can use handle to adjust the speed, (Note: adjust the speed must after start-up the machine) deasil(turn right) circumvolve means speedup and widdershins(turn left) circumvolve means speed down

If you want the speed very low, you can adjust the regulator. How to calculate the speed: As we know, the 1 m coil=192g, and for example, 10 tons melting in furnace, finish melt within 1 hour, calculate the length of coil feeding per each minute. (If the application rate is 1‰) 10000kgs/60 mins=167kg/min 167kg/192g=0.87m So the length of coil feeding for each min is 0.87m then adjust the speed.

• Power Supply : 380V, 50 Hz
• Regulation Ratio : 4.7-23.5 : 1
• Max. Traction Efforts : 300 kgs
• Fwd / Reverse Feed : Fwd feed capacity only
• Speed Indicator : Yes
• Speed Control : Yes
• Rod feeder dimensions : 0.8 X 0.25 X 0.35 meter

Standard Packing :
1 Pc per Wooden Box

PAF is used in the manufacturing of (Mn, Cu, Fe) Adal Tablets. Since this product is sodium free, it is also used as a fluxing agent to cover and dross the melt. PAF helps in stabilize the melt. PAF is an excellent product for removing Magnesium from molten aluminium (Mag Remover). It is also one of the key raw materials in manufacturing of exothermic Sleeves.

• Manufacturing Adal Tablets
• Magnesium removal from molten aluminium
• Stabilization of molten aluminium
• Manufacturing of Sodium Free Flux
• Used in manufacturing of exothermic sleeves
• Covering and Drossing flux

• F : 44-45%
• K : 27-36%
• Al : 16-21%
• Moisture : <0.5%
• Mesh : 100-300 mesh

• 25 Kg UN Approved Bags.
• 1 M.Ton Jumbo Bags.

·         Compatible with all MRI scanners.

·         All parts in the MRI room are MRI compatible.

·         Direct connection to monitor or video recorder.

·         Easy installation and high image quality.

·         MRI compatibility (up to 3 Tesla) certificate.

CS Boards for aluminium Foundries

SCOT-CS BOARD materials are asbestos fibre free “technical ceramics” made from calcium silicate in a density range from 850 to 1000 kg/m3. SCOT-CS BOARD is the standard product for use in aluminum casting and the foundry industry and is also used in the furnace industry and other process industries. SCOT-CS BOARD is the standard product for contact with molten metals up to 850 °C with low shrinkage. SCOT-CS BOARD is an improved version with higher strength and dimensional stability up to 1000 °C.

Properties & advantages Low thermal conductivity leading to low energy insulation systems Low thermal capacity Extremely high thermal shock resistance and fracture toughness leading to long life Non wetted by liquid non-ferrous metals, non reactive to lubricants such as boron nitride or graphite Asbestos free Dimensionally stable and wear resistant Excellent machinability to close tolerances

NUCLEANT range of products are available in tablet form and are used for grain refining of aluminium and its alloys.

Normally aluminium and its alloys solidify with coarse columnar and equiaxed crystals. Such a coarse grain structure poses problems like poor feeding characteristics, cracking during metal working and poor response to the surface treatment processes. Nucleant 2 is an excellent grain refiner.

In the case of hypereutectic aluminium-silicon alloys the primary silicon precipitates in coarse particles which tend to cluster. This leads to poor feeding characteristics and lower tensile strength and wear resistance properties. Nucleant 2 is used for grain refinement of such alloys

NUCLEANT addition into the metal before the casting operation overcomes these problems by producing fine equiaxed grains in the case of aluminium and its alloys.

Instructions for use :

Melt under the cover of a suitable flux and bring the metal temperature to 7300C - 7500C for aluminium and its alloys. In case of hypereutectic Al-Si alloys, bring it to the desired temperature depending on the size of the casting.

When the metal temperature is falling, plunge the recommended quantity (as per the application guide) of NUCLEANT right upto the bottom of the melt. Use a perforated and preheated bell plunger coated with refractory coating for plunging to prevent contamination of the melt with iron. In case of Al-Si hypereutectic alloy, degas the metal before treating with NUCLEANT 10 or 11 to knock off sodium in the metal.

When the reaction ceases, degas the metal with the help of a suitable DEGASER * product, dross off and modify wherever required (in the case of hypereutectic and eutectic Al-Si alloys).

Advantages:

• Improves mechanical properties
• Improves feeding characteristics
• Ensures freedom from cracking in rolled and forged products
• Improves surface finish and response to anodising

• Color :- NUCLEANT- 2 WHITE
• Form :- Tablet
• Moisture :- 0.05% MAX
• Density :- 1.70-1.90 GMS / CC
• Color :- NUCLEANT- 11 REDDISH BROWN
• Form :- TABLET
• Moisture :- 0.05% MAX
• Density :- 1.70-2.10 GMS / CC

Tablet Size : 50 grms, 100 grms, 200 grms, 500 grms Tablets.
Packing : 20-25 Kg Corrugated Boxes.
Application Rate : 0.20-0.25%

Scot Porosity Meter (hydrogen tester) is designed base on the solution of the hydrogen in the liquid metal is higher than the solid metal. When the liquid metal start to solidify, the hydrogen is forced to release out and form the bubbles at the surface and the inside. By observing the bubble and the surface shape, we can measure the hydrogen content according to the experience

Scot Porosity Meter is easy to use and fast result. It is best applied to test the hydrogen before each cast, especially for cast the alloy ingot.

As per attachment

• Power supply: 220~250 VAC,120W
• Maximum Vacuum: –0.1Mpa
• Vacuum Speed: 0.5L/sec
• Temperature allowed: = 400
• Volume of the bell: 150x200mm
• Time to reach the Max. vacuum: = 2 min
• Weight: 32kg
• Timer adjust range: 0-99.99h

Standard Packing :
1 Pc packed in wooden Box (Export Packing)

Scot-Fe Adal Tablets are used to adjust and compound the content of Fe in Aluminium alloy and to replace Al-Fe alloy. 

Instruction :
1. When the temperature of melt reaches 730-7600C, skim the slag off.
2. Add demanded additive and wait for 10 minutes then stir completely. (If the melt is dirty, refine again and deslag and then add the additive to improve the recovery.)

 Note : The recovery of 75 FeAl or 80FeAl can reach 95%

ALTi5B1 /ALTi3B1/ALTi5B1((Coil / Stick / Ingots)

General Description

Scot-AlTi5B1 Grain Refiner is an integrated part of any aluminum casting unit to improve and enhance the grain structure, homogeneity and properties in Aluminum and its alloys. The crystallization of aluminum into coarse columnar, equiaxed or dendritic grains is undesirable. Coarse particles tend to cluster and lead to poor feeding characteristics and lower tensile strength and wear resistance properties. Addition of Scot-AlTi5B1 series helps overcome these problems by refining the grain structure of the metal with the help of titanium and boron.

General Description

1.Aluminium alloy ingot mainly used for die-casting alloy battery industry and Auto Components

 2.Aluminium alloy ingot widely used in Painting/ Printing/Dyeing/pharmaceutical/rubber industry etc

 3.Aluminium alloy ingot is widely used in chemical industries, zinc and other metal alloy plating coating industry

Karnalite flux is a sodium free flux that can be used for all aluminium alloys for degasing, covering and drossing. It also removes all alkaline metals from molten aluminium. It also form a protective coating to avoid oxidation. Karnalite is also used for removing hydrogen from the melt.

Uses : Avoids Oxidation Removal of Hydrogen from the melt. Sodium, Calcium and Magnesium Removal  Covering and drossing flux.

Economical method Instructions for use : Karnalite flux should be added to the melt at the temperature of 690-750 Degree Celcius. The recommended application rate should be 0.1 to 0.2% of the melt size. Rebel the melt and remove the dross from the top of molten metal.

We are the leading manufacturer of Flashback Needle.

Scot- Castable is a high temperature low iron castable with excellent resistance to abrasion. This material is suitable for patching applications. This product contains organic fibres for increased drying rates.

This product was specifically designed for installation by towelling. While it is also an excellent gunning material, it should not be used in overhead applications. The comprehensive range of dense castables cover the complete temperature spectrum up to 1850 Degree Celsius. Four class of product are offered namely - standard, abrasion resistant, gunning and extra course aggregate. These products have been designed utilizing different aggregates and cement binders to ensure they meet the requirements of most applications.

USES:-

• Launder Line Repair
• Furnace wall repair
• Furnace lining repairs
• General purpose refractory cement.

• STANDARD PACKING
• 25-50 KG HDPE LINED BAGS
• Store in cool and dry conditions

SCOT-PLUNGER LUBE GF – 70 is a liquid plunger lubricant for cold chamber pressure die casting machines.

SCOT -PLUNGER LUBE GF – 70 consists of mineral oil with special additives and contains no graphite the soiling of the machine is low.

For steel and CuBe plungers wetting and lubrication is very good.

Application and dilution:

PLUNGER LUBE GF – 70 can be applied by dropping or spraying. The quantity of PLUNGER LUBE GF – 70 depends on temperature, plunger diameter and alloy; average is 2 – 5 g,  

Characteristics:

• Chemical Characteristics mineral oil, additives
• Appearance Greenish liquid
• Density g/cm3 approx.9
• Viscosity cSt@400C approx.260

Packing:

• Bucket, 20 Ltr
• Drum, 210 Ltr

General Description:

ZINCREX range of fluxes are in powder form and are used for protecting and cleansing zinc and its alloys during melting and for high recovery of zinc from drosses.

Purpose:

Normally zinc is prone to oxidation during melting and the dross formed contains lot of metallics in it.

ZINCREX range of products help in reducing the oxidation during melting as well as recovering metallics from the dross.

Benefits:

ZINCREX range of products:

1. Curtail formation of zinc oxide and hence metal losses 
2. Ensure scimming with low metal content 
3. Clean the metal thoroughly and absorb suspended bodies and dirt 
4. Enalble recovery of clean metal from low grade skimming and drosses

Instructions for use:

ZINCREX Standard

Add sufficient ZINCREX(about 0.25% by weight) during early stages of melting to form cover. When the change is compeletely molten, add a further 0.25% of ZINCREX and plunge and rabble well into the melt, preferably with a perforated plunger. After all reactions have ceased, allow the melt to settle for a few minutes before skimming clean and pouring.
ZINCREX-85

Allow the dross to cool and blacken overall so that all flame has died out and there are no visible incandescent hot-spots, which could cause excessive fumes.Do not let the temperature rise above 400⁰C during treatment.Rabble the black dross and add ZINCREX-85 until a powdered residue is obtained.On rabbling further, the application rate (usually from 0.25 to 0.5% depends upon the quantity of dross treated. Avoid excessive additions and add a little at a time.Skim the powdery residue with a perforated skimmer. Once a good separation is obtained, do not restir.For maximum metal recovery, place the skimmer in a preheadted in a conical shaped dross cart, where with stirring more metal is released through the bottom.

Standard Packing: 20kg fibreboard drum

Precaution:

ZINCREX compounds are hydrophobic and the containers should be kept securely closed when the products are not in use.

Available in Powder, Lumps, Sheets, filing.

Production of titanium based alloys

Mn Flakes are used for addition into molten aluminium to make various grades of alloys. Mn flakes can also be crushed and compacted into tablets for better recovery and dissolution.

Aluminium Alloy

Mn : Min. 99.7% Pure C.: 0.04% Max S : 0.05% Max P : 0.005% Max Si + Fe : 0.20 Max Size : Flakes or Powder

Copper powder is easy to dissolve and give better recovery in molten metal.

Production of Master alloys and Copper Adal Tablet

General Description

Scot-BN-Coating is used in lining, casting lift table, launder, distributor filter box, iron crucible and thermocouple. It is also used to repair tundish, lining and furnace doors and other types of ceramic products. It is a non-wetting coating used in mainly used in Aluminium and zinc Industries. Scot-BN-Coating is used in metal lining and casting which are in contact with molten metal.

Uses

• Not-wetting characteristics with aluminium
• Makes the surface of Ceramic more smooth
• Dross and other metal impurities easily removed
• Increased the life of ceramic lining and ladles
• Easy application method, easy storage
• Does not interfere with the melt quality
• Perfect refectory and insulation performance
• Protects the surface of metal lining from molten metal and Iron impurities
• Absorbs and cushions the impact of sudden temperature changes

Instructions for use

1. Scot-BN-coating should be diluted with water in the ratio of 1 1.5-2, i.e. 1 kg coating can be mixed with 1.5 to 2 kg water.

2. Customers can choose different densities depending on application methods.

3. After dilution, brush or spray on the warm up lining or the ladles equally (uniform thickness at 50 Degree Celsius). Warming up is essential for the ceramic material or metal surface to absorb the coating perfectly.

4. When coating is dried, wipe till the surface becomes smooth. If coating flakes are observed after some time, the same method of application should be repeated once more.

5. Spraying and brushing can be applied to all materials which are in touch with molten metal.

Specifications and Packing

• Scot-BN-Coating
• Appearance:  White paste
• Viscosity:Depends on rate of dilution and application method
• Packing 4Kg. / Drum, 16 Kg. per Carton.

Store in cool dry place and stir well before use.

• Superia (DES - Eluting Stent with Biodegradable Polymer)
• Sapphire Rx and NC Balloon
• Sapphire II (CTO Balloon- 1mm diameter)
• Scoreflex Balloon (Plaque modification Device)
• Expirator (Thrombus aspiration Catheter)
• Curex (Drug Eluting Balloon)

It is used for recovering Aluminium  from hot Dross

Recovering aluminium from hot dross is an easy and cost effective method to save lot of money and also well as reduce the environmental impact of dross waste.

Scot-Dross Press can be use for all aluminium melting units where dross per batch is over 50 Kg. Die casters, Extruders, Primary and secondary smelters, etc.

•  Fiber optic multi-channel signal conditioner for temperature          measurement in industrial and laboratory applications.

•  System temperature range is -80 to 300 °C.

•  Response time: 250 milliseconds switching  with multiple              channels.

•  Digital or analog signal output.

Patient Identification bands is an important way to reduce patient safety risks. Patient misidentification continues to result in medication errors, transfusion errors, testing errors, wrong person procedures, and the discharge of infants to the wrong families. Today, with as many as one million people harmed by errors during treatment at hospitals each year, identification of patient using wristbands helps minimize medical errors and administrative issues can be handled efficiently.

Bio-X offers optimal and secure patient identification solutions for healthcare facilities.

Colour coding of wristbands facilitates rapid visual recognition of specific issues and can be modified as per the requirement of the organization.

We offer Patient Identification solutions for admissions, blood, mother and baby, paediatrics, disaster response, outpatient and emergency room purposes.

ADULT PLASTIC MATERIAL WRITE ON BANDS :

We offer you the write on type Compound Material. The Compound material is a non tearable and unbreakable. Our compound material has a non-transferable secure plastic snap provides maximum security.

Fast and easy option where the patient data can be printed or written with any ink on the bands itself.

Other Details:

• A Unique gadget meets for all your professional demands in cardiac world.
• Everything you love about iPad, you get it in your cardiology world, retina display, gestures, wonderful animation...
• Thanks to the 3.1 million pixels and anti-aliased algorithm, your iPad have ECG displayed with all details
• vhEcg is the most elegant 12-Lead ECG device, light weight and handy, you do your work anywhere and anytime.

Features:

• Simultaneous 12-Lead ECG
• Automatic Measurements and Interpretations
• Filters: Low Pass (different setting)
• Baseline Wander
• Motion Artifact
• Report: Cloud print or PDF upload

ECG Recorder Specifications:

• Sampling Rate:
• A/D: 24K SPS/Ch
• Recording: 1K SPS/Ch
• Patient Multi-Channel Synchronous A/D
• Quantization Precision
• A/D: 24 Bit
• Recording: 16Bits
• Resolution: 0.4µV
• Common Mode Rejection: >110dB
• Input Impedance : >20M
• Frequency Response: 0.05-250Hz (±3dB)
• Time Constant: ≥3.2Sec
• Maximum Electrode Potential: ±300mV DC
• Dynamic Range: ± 15mV
• Defibrillation Protec : Built-in
• Communication: WiFi
• Power: 2xAA Batteries

Scot-AlZr master alloy waffle is an excellent alloy to increase thermal conductivity and grain modifying agent for aluminium and its alloys.

Advantages 
 
• Increases current flow upto 2.5 times than regular conductor wire. • Increases the strength of aluminium and aluminium alloy wires and rods.
• Thermal conductivity is significantly increased.
• AlZr inhibits recrystallisation and grain growth at elevated temperatures.
• AlZr enhances weldability by resisting grain coarsening in the heat sensitive zones close to welded joints.
• Reduces susceptibility to stress corrosion significantly.
• Reduces sensitivity to quenching rate from the solution temp.
• Zircon is a specified minor addition to a number of high strength wrought aluminium alloys.

Instructions for use :
1. Prepare the required alloy composition. Follow the normal fluxing and cleaning procedure as recommended.
2. After the degassing operation, add Scot-AlZr at the desired application rate temperature above 750 Deg C.
3. Degas the melt with tablet degaser or by mobile degassing unit and dross off by using small quantity of coverflux.
4. Rabble the melt to ensure homogeneity, wait suitable time then use.